Spot it in ClickFlare. Fix it in ClickFlare.

Ads Manager puts your Meta, Google Ads, TikTok, Taboola, Outbrain, RevContent, MediaGo, NewsBreak and Whop campaigns inside your tracker. Pause, scale and change budgets right from the row that shows each campaign's real profit.

Start free trial

Open Ads Manager

New to ClickFlare? 14 days free, no credit card.

Already a customer? It's in your left menu, campaigns already loaded.

Try it:

Search for campaigns, offers, traffic sources...⌘K

0 selected

Changes go straight to Meta and are recorded in Logs.

Increase budget by 20%New values previewed in the table

Status, budget, bid and spend come from the ad platformRevenue, profit and ROI come from ClickFlare tracking

That was the real Ads Manager, on sample data. Now try it on your own campaigns.

Start free trial

One losing campaign. Two very different mornings.

Same campaign, same decision. Watch what it takes to act on it.

Without Ads Managerstep 1

1tabs open

0logins

0copy-pastes

With Ads Managerstep 1

ClickFlare · Ads Manager

1tab open

0logins

0copy-pastes

Why not just use Meta, Google Ads or Taboola directly?

Because you already make the call in ClickFlare, with numbers you trust. Ads Manager puts the controls on that same row.

Pause or resumeSent straight to the platform

BudgetClick, type, Enter. Or change 50 at once

ROIThe number you decide on

US | Final Expense | 50+Paused on Meta

$576.44

55.00%

No searchingIt's the row you're already looking at

RevenueFrom ClickFlare, matching your reports

Go on, flip the switch or click the budget.

In each ad platform

In ClickFlare Ads Manager

To fix one losing campaign

5 tabs, 4 logins, 4 copy-pastes

1 tab, 0 logins, 1 click

Logins

One per platform

One. You're already in.

Finding the campaign

Copy the name, search for it in every tool

It's the row you're looking at

Revenue and profit

Each platform's own attribution, which can under-report

ClickFlare's tracking, the same numbers as your reports

Comparing platforms

A different layout in every tool

The same view and the same flow for every platform

Bulk budget changes

Different on every platform

Set, raise or cut many at once, previewed before they go live

Four moves. One screen.

Your whole morning check, without leaving ClickFlare.

Find the leak.

Sort by spend. The money-losers float to the top, with profit and ROI right next to them. Drill into ad sets and ads to see exactly what's bleeding.

Your Meta campaigns, with real profit on every row.
Sort by spend. The biggest budgets rise to the top.
Found it: $451 spent, $81 lost. That's the leak.

Kill it. Now.

One switch and it's paused on the platform, before you'd have found the login page. Losers in bulk? Select them all and hit Pause once.

The leak keeps spending while you hunt for it.
One click on the switch pauses it on Meta.
Spend stops. The change is saved in your logs.

Feed the winners.

+20% on every winner in one move, or base it on CPA, revenue or profit. See every new budget before it ships. Nothing goes live by accident.

Select the campaigns with the best ROI.
Raise all three by 20%. Preview the new budgets.
Apply. All three update on Meta at once.

Cut the junk placements.

Open any campaign's site report on Taboola or publisher report on Outbrain, sort by ROI and block the placements that never convert. One switch each.

The campaign's site report, worst ROI first.
Block a site that never converts. One switch.
Blocked. $42.95 a day stops going to dead sites.

Built for teams

Hand it to the whole team. Nothing breaks.

Ads Manager follows the same rules as your tracker, and nothing goes live without a confirm.

Same permissions as the tracker

Everyone sees and changes only what they can already see in ClickFlare. Campaigns stay isolated by workspace.

Every change is logged

Pauses, budget and bid changes are all recorded in the logs, so there's never a mystery edit.

Preview before it ships

Bulk budget changes show every new value in the table first. Nothing reaches the platform until you confirm.

No caps, no limits

Pause 200 campaigns in one go if you need to. Bulk actions have no caps or rate limits.

Try it on your own campaigns.

New here? 14 days free. Already a customer? It's in your left menu.

Start free trial

Open Ads Manager

Same traffic, same ads, more profit.

What teams see when the controls sit right next to the numbers they already trust.

−34%spend on losing campaigns, caught and paused sooner

47 minsaved per buyer, every day, on the daily check

+18%profit on the same ad spend

2,400+pauses, budget and bid changes made from ClickFlare

My buyers live in ClickFlare. Every time they had to jump into an ad platform to make a change, we lost time and focus. With Ads Manager they don't leave anymore, and decisions turn into action straight away.

Artem MorozCEO, dgtlreligion

"In Ads Manager the data looked clean from day one, so that's where we work now. We turn campaigns on and off and scale budgets throughout the day, right next to numbers we trust."

Lucien AvrilLead Media Buyer, Airfind

"Ads Manager is where my day starts. I sort by ROI, pause what isn't converting and push budget into what is, across every platform, without leaving ClickFlare."

John CastoFounder, JC Leadgen

Nine platforms live. One screen for all of them.

Each platform gets its own tab in Ads Manager, with the structure and status names you already know from it. You only see the platforms you've connected.

Running something else?Open its tab in Ads Manager and join the waitlist. The most requested platforms are built first.

MetaCampaigns · Ad sets · Ads

Google AdsCampaigns · Ad groups · Ads

New

TikTokCampaigns · Ad groups · Ads

NewsBreakCampaigns · Ad sets · Ads

WhopCampaigns · Ad groups · Ads

TaboolaCampaigns · Ads · Sites

OutbrainCampaigns · Ads · Publishers

New

RevContentCampaigns · Ads

New

MediaGoCampaigns · Ads

Setup

Platform connected? You're already set up.

Ads Manager uses the platform connections you already have in ClickFlare. Nothing to install, nothing to configure.

Your campaigns are already there, ready to browse

First change? Reconnect the platform once to allow it

Your tracking and reports stay exactly as they are

New to ClickFlare? Connect your ad platforms in a few minutes and Ads Manager fills up on its own.

See the integrations →

during rollout

Included in every plan, no limits.

Free on every ClickFlare plan during rollout. We'll announce any pricing well in advance.

The meter is running

Ads Manager costs $0. Waiting doesn't.

$0.00

spent on losing campaigns since you opened this page.

Your daily spend on losing campaigns$300/day

Time from spotting a loser to stopping it3 hours

Your numbers, your estimate: daily spend × time to act, over 30 days.

Today$1,125

a month lost in the gap between spotting a loser and stopping it.

With Ads Manager$6

Spotted and paused from the same row, in under a minute.

Pause it.Flip the switch and stop the meter.

Start free trial Open Ads Manager

Questions, answered.

Do I need to set anything up?

No. If your ad platform is already connected to ClickFlare, your campaigns are already in Ads Manager. Open it from the left menu.

Why do I need to reconnect a platform, and does it affect my tracking?

Seeing your campaigns works with the connection you already have. Making changes, like pausing a campaign or editing a budget, needs one extra permission, so the first time you make a change on a platform you reconnect it once and approve. It only adds that permission: your tracking and reports stay exactly as they are.

Can someone on my team break something?

No. Ads Manager follows the same permissions as your tracker: everyone sees and changes only what they could already see in ClickFlare, and campaigns stay isolated by workspace. Every pause, budget and bid change is recorded in the logs. Bulk budget changes are previewed in the table first, and nothing is sent to the platform until you confirm.

How fresh is the data?

As fresh as your account's sync. With the 5-minute or 15-minute add-on, Ads Manager refreshes that often. Otherwise it updates every 30 or 60 minutes, depending on your plan.

Can I undo a change?

There's no one-click undo. Anything you pause you can turn back on, and any budget or bid can be set back to its old value. That's why bulk budget changes show the old and new values side by side before you confirm.

Why don't my numbers match the ad platform's?

Revenue, conversions and profit in Ads Manager come from ClickFlare's tracking, the same numbers as in your ClickFlare reports. Ad platforms attribute conversions their own way, so their numbers can differ. For spend, check that the date range and timezone match the ones you use on the platform.

Which platforms are supported?

Meta, Google Ads, TikTok, NewsBreak, Whop, Taboola, Outbrain, RevContent and MediaGo. Running something else? Open its tab in Ads Manager and join the waitlist. The most requested platforms are built first.

How much does it cost?

Nothing during the rollout. Ads Manager is free on every ClickFlare plan, with no limits. It will become a paid feature later, and we'll announce pricing well in advance.

Stop hunting for campaigns. Start acting on them.

Free 14-day trial, no credit card required. Already a customer? Ads Manager is in your left menu, free on every plan during rollout.

Start for free

Book a demo

The leading platform to capture, analyze, and attribute performance data across virtually every ad channel.

100% Secure

99.99% Uptime

24/7 Support